Custom Men's 2-in-1 Sublimated Running Shorts (with Liner Pocket) – Suitable for Branded Teamwear and Training Programs
- Product Type: Men's 2-in-1 sublimated running shorts
- Shell: Polyester four-way stretch, 140 gsm reference
- Liner: Polyester spandex mesh compression layer
- Pockets: Two side zip pockets, back pocket, fixed inner pocket
- Waist: Black elastic with drawcord
- Colour: Black body, forest green side panels; custom colourways available
- Sizes: XS–XL reference; wider range on request
- MOQ: Confirmed per project — it depends on construction, fabric, decoration and order mix. Contact us to discuss
- Customisation: Body colour, panel colour, motif, logo placement, pocket layout, labelling, packaging
- Scope: Shorts only unless a set is quoted
A black 2-in-1 sublimated running short with a mesh compression liner, side zip pockets and a botanical print across the left leg.
- Parameter
- Size Guide
- Service Assurance
- Why Choose Bizarre Sports
- Related products
Parameter
Two Layers, One Garment
These 2-in-1 running shorts put the compression liner inside the shell, so you do not buy or wash two pieces to feel supported. Lined running shorts like this give you one garment to pull on before a session. The inner layer is a polyester spandex mesh that holds the thigh without pinching, and the outer shell moves over it rather than sticking. On trail running shorts with pockets and a liner, that separation is what stops the whole garment going heavy the moment it gets wet.
Four-Way Stretch Shell
The body is a four-way stretch polyester, which means it gives in both directions rather than only across the waist. That matters on custom men running shorts used for stride work and hill repeats: a two-way stretch fights the leg on the lift, a four-way follows it. Check the shell on the sample by pulling it diagonally, not just side to side, before you approve the fabric.
Pockets That Actually Hold
This pair carries two side zip pockets, a back pocket and a fixed inner pocket on the liner. A zip closure is the difference between a phone staying in the short and a phone sliding out at a stride. The back pocket sits high enough to stay flat under a jacket. Tell us what your runners actually carry, and we will place the pockets around it instead of adding them afterwards.
Botanical Print on the Left Leg
The left leg carries a tropical botanical print that runs from the hem upward, with deep forest green side panels framing it. On a sublimated running short, that placement is deliberate: the print reads when the leg is in motion without covering the whole garment. If you want a different motif on your sublimated running shorts, the same panel can carry a club crest or a sponsor block instead.
Where It Sells
Road running, trail sessions, gym work and race kit all suit this pair. For a run club, the botanical print gives a season colour that photographs well. For a brand, these lined running shorts are the premium option on the shelf, well above a plain shell with no liner. For an event, the side panel is where the sponsor mark goes.
Customise the Print and the Panels
Body colour, panel colour, motif, logo placement, pocket layout, liner spec, labelling and packaging are open to your brief. Because the whole piece is sublimated, the botanical artwork can change per drop without a new pattern. If you are building a range of trail running shorts with pockets, we keep the liner and the shell spec fixed so every colourway fits and performs the same.
Sizing the Liner
The reference table lists the available sizes. A lined short sits closer at the thigh than a shell-only pair, because the liner adds a layer with its own stretch. Confirm the size set on a runner in a stride and a deep lunge. If your group sits between sizes on custom men running shorts, size up for room through the quad and stay true for a compressed fit.
Sample First, Then Bulk
We would rather send a sample than argue about a bulk order. Run in it, wash it, and check the liner recovery, the zip travel and the print edge at the side seam. If the liner on your 2-in-1 running shorts rolls at the hem or the zip snags, we fix it at sample stage, which is cheaper than a claim after delivery. Wash sublimated running shorts once before you judge the print edge.
How to Get a Quote
We do not publish a fixed price, and we do not publish a fixed minimum, because both depend on the liner, the print coverage, the pocket layout and the size mix. Send your artwork, colour direction, quantities per size and target date, and contact us to discuss what works for your order.
Size Guide
Measurements are shown in inches. This men's running short reference is sized from XS to 2XL based on the confirmed production breakdown. The inner liner length is measured without the waistband, while the outer shorts length includes the inner gusset. The four way stretch body and the inner compression liner layer carry the same XS to 2XL size block so the inner liner stays in line with the outer shorts across the full size range.
| Short Measurement in Inches | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Outer Length | 10.8 | 11.4 | 12.0 | 12.6 | 13.2 | 13.8 |
| 1/2 Waist | 12.4 | 12.8 | 13.6 | 14.4 | 15.2 | 15.9 |
| Front Rise (Excludes Crotch, Includes Waistband) | 10.0 | 10.4 | 10.8 | 11.2 | 11.6 | 12.0 |
| Back Rise (Excludes Crotch, Includes Waistband) | 12.0 | 12.4 | 12.8 | 13.2 | 13.6 | 14.0 |
| Inner Length Outer Short (Includes Crotch) | 2.2 | 2.4 | 2.6 | 2.8 | 3.0 | 3.1 |
| 1/2 Hem | 12.0 | 12.4 | 12.8 | 13.2 | 13.6 | 14.0 |
| Waistband Height | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 |
| Inner Liner Length (Excludes Waistband) | 12.8 | 13.4 | 14.0 | 14.6 | 15.2 | 15.7 |
Service Assurance
Every custom apparel project is managed through documented approval checkpoints designed to reduce avoidable production risk.
- Artwork, colour direction, material, and label details reviewed before sampling
- Sample feedback recorded before bulk production approval
- Pre-production details reconfirmed before production begins
- In-process quality checks and final inspection completed against the approved reference
- Label and packing requirements checked against the confirmed project details
Any change after approval is reviewed before it is added to the active production specification.
Why Choose Bizarre Sports
Bizarre Sports focuses on custom teamwear projects that need clear product communication from artwork through production approval.
- Custom project support built around your artwork, garment brief, and brand details
- Clear approval stages for sample, label, and production specifications
- Product information organised for practical review before bulk production
- One project record for confirmed details and revision tracking
- Custom OEM teamwear approach for seasonal, event, and branded apparel programs







