+86-13995683615
All Categories
premium 140g micro mesh seamless short sleeve t shirt with hd silicone print sublimation printing programme-0

Premium 140g Micro-Mesh Seamless Short-Sleeve T-Shirt with HD Silicone Print + Sublimation Printing Programme

  • Product Type: Men's seamless short sleeve training t-shirt
  • Fabric: 140g micro mesh knit, tubular body
  • Neckline: Bonded crew neck
  • Trim: Flatlock hem, open knit ventilation zone at upper back
  • Print: HD silicone print chest mark, sublimation ready for panels
  • Colour: Charcoal; custom colourways available
  • Sizes: XS–XL reference; wider range on request
  • MOQ: Confirmed per project — it depends on construction, fabric, decoration and order mix. Contact us to discuss
  • Customisation: Base colour, print method, mark size, sleeve length, labelling, packaging
  • Scope: Top only unless a set is quoted

A 140g micro mesh seamless short sleeve t shirt with a bonded crew neck, silicone print chest mark and vented back zone.

Brand:
Bizarre Sports | Custom OEM Teamwear
Spu:
BZ0334
Parameter

140g Is the Whole Argument

Weight decides how a training shirt behaves. A 200g knit holds shape and traps heat; a 120g knit breathes and shows everything underneath. This micro mesh tee sits at 140g, which is the point where a shirt still has enough body to drape and enough openness to move air. That number is the reason the piece works for high intensity sessions rather than only for a warm-up.

Micro Mesh, Not Perforated Fabric

The mesh is knitted into the structure rather than punched through a solid cloth afterwards. A perforated fabric has cut edges that fray and a surface that looks machined. On this seamless sports tee the open structure is part of the knit, so the airflow comes from the construction rather than from holes.

Tubular Body, No Side Seam

The body is knitted as one continuous tube, so there is no side seam running under the arm. That is the practical difference between a seamless sports tee and a stitched one: nothing to rub at the point where a training shirt moves most. It also means the garment hangs from the shoulder rather than from four joined panels.

HD Silicone Print and How It Wears

A silicone print sits on the surface as a raised mark with a matte finish, which is why a silicone print tee looks sharper than a sublimated one at close range. The trade is that a silicone mark needs the right cure temperature: under cure and it peels at the edge, over cure and the film goes brittle. We check the cure on a wash test before any run.

The Choice Between Silicone and Sublimation

A sublimated mark lives inside the fibre and cannot lift, which suits an all-over pattern or a busy artwork. A silicone print tee suits a clean logo on a solid ground, where the raised edge is the point. For most club kit the two are used together: silicone for the chest mark, sublimation for the back panel.

Bonded Crew Neck

The collar is bonded rather than stitched, so there is no seam tape against the neck. On a crew neck sports tee worn for an hour of training, that edge is where a wearer notices a garment first. Bonding also keeps the neckline from waving after repeated washing, which a stitched neckline tends to do.

Ventilation Zone at the Back

The upper back carries an open knit zone, which is where heat accumulates under a shirt during a hard session. Putting the vent there rather than at the sides is deliberate: the back is flat against the garment and holds warmth, while the sides already move air as the arms swing.

Where It Sells

Gym training, club kit, school sport and corporate activewear all suit this piece. For a club ordering a custom training tee, it is the shirt that carries a club mark without a printed look. For a brand, the 140g weight is the spec a buyer can compare against a competitor sheet.

Customise the Mark and the Weight

Base colour, print method, mark size, sleeve length, labelling and packaging are open to your brief. If you are building a range, we keep the tubular block and the 140g base fixed so every colourway in your custom training tee line fits and wears the same.

Sizing a Tubular Knit

The reference table lists the available sizes. A tubular knit has no side seam to give, so the size block matters more than on a stitched shirt. Confirm the size set on a wearer in motion, and check the neckline and the armhole rather than the chest alone.

Sample First, Then Bulk

We would rather send a sample than argue about a bulk order. Train in it, wash it three times, and check the silicone mark edge, the bonded neckline and whether the knit has gone thin at the shoulder blades. If the print has lifted or the neck has waved, we change the spec before the bulk run.

How to Get a Quote

We do not publish a fixed price, and we do not publish a fixed minimum, because both depend on the knit weight, the print method, the colour count and the size mix. Send your artwork, colour direction, quantities per size and target date, and contact us to discuss what works for your order.

Ordering a Club Set

Most orders for this micro mesh tee arrive as a club set rather than a single shirt, so the size split matters as much as the colour. Send the roster with the artwork and we will confirm the split against the tubular block before cutting.

If you want a custom training tee that carries more than one mark, tell us early. A silicone mark on the chest and a sublimated panel on the back need different setup, and quoting them together is cheaper than adding the second mark after the first run.

For a crew neck sports tee used across a club, keep one base colour and vary only the mark. A seamless sports tee built that way photographs as a kit rather than a collection of shirts, and a reorder of the same silicone print tee matches the original run.

Size Guide

Is 140g Too Thin for Training?

No. Weight and durability are not the same thing. A 140g micro mesh knit with a tight structure holds up through repeated washing; a heavier loose knit can pill sooner. What 140g buys you is airflow, and what it costs is opacity in very pale colours, which is why we check a strike-off on any light ground.

Will the Silicone Print Lift?

Only if the cure is wrong. We test the mark on a wash cycle before the bulk run and reject a batch where the edge lifts. A correctly cured silicone print tee holds through a season of washing.

Can You Mix Silicone and Sublimation?

Yes, and most club orders do. Silicone for the chest mark, sublimation for a back panel or a sleeve graphic. Both are quoted per project because the setup differs.

Service Assurance

Every Bizarre Sports order is shipped with a sample confirmation step, a pre-production sample for buyer approval, and a final inspection report before carton sealing. Lead time and MOQ are scoped to each enquiry; replacement or refund is honoured for manufacturing defects verified on receipt.

Why Choose Bizarre Sports

Bizarre Sports is a custom OEM teamwear manufacturer with a vertically integrated cut-and-sew workshop, in-house sublimation print line, and a sample-to-bulk turnaround that keeps basketball, training and lifestyle collections on a tight release calendar for brand and retail buyers.

FAQ

Size Guide

A tubular knit has no side seam to give, so the size block matters more than it does on a stitched shirt. Measure the chest flat and the body length from the high point of the shoulder, and compare against a shirt the wearer already trains in.

Check the neckline and the armhole on the body rather than the chest alone. A bonded crew that sits too tight reads as a collar problem even when the chest fits, and an armhole that is too small restricts the arm before the body does.

A 140g knit sits close without compressing, so if a wearer is between sizes, take the larger one for a training shirt and the smaller one only if the piece is for race day.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
Attachment
Please upload at least an attachment
Up to 3 files,more 30mb,suppor jpg、jpeg、png、pdf、doc、docx、xls、xlsx、csv、txt
email goToTop